|
FABRIC DISCLAIMERS
#1
COMFORT, SOFTNESS, AND CASUAL NATURE ARE CHARACTERISTICS OF THIS FABRIC. IT
SHOULD BE USED ONLY WHERE SHAPE RETENTION AND PRECISE TAILORING ARE NOT
PRIORITIES.
#2
THIS FABRIC IS DYED AND THEN SUBJECTED TO MULTIPLE WASHINGS TO PROVIDE A
COMFORTABLE FEEL AND CASUAL APPEARANCE. DUE TO THE FINISHING PROCESS, THE
CURRENT DYE LOT COULD VARY CONSIDERABLY FROM THIS SWATCH. ALSO, STREAKS, DYE
MARKS, DARK PATCHES, AND SHADE VARIATIONS ARE INHERENT AND SHOULD NOT BE
CONSIDERED DEFECTS.
#3
SLUBS, STREAKS, LOOSE THREADS, AND OTHER VISUAL IMPERFECTIONS ARE NATURAL
CHARACTERISTICS OF THIS FABRIC. THEY SHOULD NOT BE CONSIDERED DEFECTS. ALSO,
SHADE VARIATIONS EVEN IN THE SAME BOLT OF FABRIC ARE TO BE EXPECTED.
#4
THIS FABRIC CAN NOT BE INVERTED BECAUSE OF THE SHADING DIFFERENCES CAUSED BY
OPPOSING KNAP DIRECTIONS. THEREFORE, THE UNBALANCED STRIFE DESIGN WILL BE
MISMATCHED THROUGHOUT WHEN APPLIED TO FURNITURE.
#5
VERTICAL STRIPES WILL BE TAILORED TO MATCH IN THE CENTER. MISMATCHES MAY OCCUR
TO THE LEFT AND THE RIGHT OF CENTER, DUE TO REPEAT VARIATIONS WOVEN INTO THE
FABRIC. HORIZONTAL STRIPES WILL NORMALLY BE MATCHED AROUND THE BOTTOM OF THE
PIECE OF FURNITURE OR OTHER PREDOMINANT SPOT.
#6
THIS FABRIC WILL DISPLAY SHADE VARIATIONS THROUGHOUT THE ROLL. THESE VARIATIONS
WILL EXTEND TO THE UPHOLSTERY AND MAY APPEAR RANDOMLY ESPECIALLY ACROSS
PATTERN-MATCH SEAMS.
#7
THIS WOVEN TEXTURE IS NOT SUITED FOR DETAILED TAILORING. THEREFORE ITS USE IS
RESTRICTED TO OUTSIDE BACK, OUTSIDE ARMS, AND FRONT SEAT DECK OF NONSKIRTED
PIECES, AND TO THE FRONT ARM PANEL WHEN APPLICABLE. THE FACTORY MUST ADVISE COM
COMBINATION REQUIREMENTS.
#8
THIS LUXURIOUS CHENILLE HAS A STRETCH FACTOR OF 16%. SPECIAL PROCESSING AND
PRE-WASHING CREATE STRONG DESIGNER APPEAL BUT LIMIT SOME MANUFACTURING
APPLICATIONS. TAUT UPHOLSTERED AREAS WILL PULL OUT THE GATHERS; CUSHIONS, ARMS,
AND OUTSIDES WILL EXHIBIT THAT “LOOSE FABRIC” LOOK; AND SKIRTS OF ANY KIND
SHOULD BE AVOIDED. SKIRTS BY THEIR OWN WEIGHT WILL PUDDLE ON THE FLOOR TO
VARYING DEGREES.
#9
RANDOM PATCHES OF KNAP VARIATIONS GIVE THIS FABRIC A MOTTLED APPEARANCE WHEN
APPLIED TO FURNITURE.
#10
WRINKLES IN THIS FABRIC ARE CHARACTERISTICS AND SHOULD NOT BE CONSIDERED
DEFECTS. IT SHOULD BE USED ONLY WHERE PRECISE TAILORING IS NOT A PRIORITY.
#ll
EMBROIDERY, LARGE REPEAT, VARYING WIDTHS, AND INCONSISTENT DESIGNS ARE ALL
INHERENT CHARACTERISTICS. HOWEVER, THESE SAME TRAITS MAKE PATTERN MATCH AND
PRECISE TAILORING IMPOSSIBLE. LIMIT APPLICATION TO PIECES WITH SIMPLE
UPHOLSTERY. SLUBS, STREAKS AND LOOSE THREADS WILL BE EVIDENT THROUGHOUT.
#12
NOTE THAT THE CENTER MOTIF APPEARS ONLY DOWN THE MIDDLE OF THIS FABRIC. “T” SEAT
CHAIRS WILL BE CUT CENTERING THIS MIDDLE MOTIF. SOFAS & LOVESEATS WILL BE CUT
FROM A DIFFERENT MOTIF ON EACH SIDE OF THE FABRIC. TO MATCH A “T” SEAT CHAIR TO
A SOFA WILL REQUIRE SEAMS IN THE SEAT CUSHION.
#13
LARGE AREAS SUCH AS SOFA IN-BACKS, OUTBACKS, AND SEATS, WILL BE SEAMED BECAUSE
OF THE 54” WIDTH LIMITATION. THESE SEAMS WILL EXHIBIT STRIPS OF CONTRASTING COLOR
DEPENDING ON THE EXTENT OF COLOR DIFFERENCE BETWEEN THE FOREGROUND AND
BACKGROUND FIBERS.
#14
THE PURE ELEGANCE OF THIS FABRIC LIMITS ITS APPLICATION. EMBROIDERY, LARGE
REPEAT, VARYING WIDTHS, AND INCONSISTENT DESIGNS ARE ALL INHERENT
CHARACTERISTICS. HOWEVER, THESE SAME TRAITS MAKE PATTERN MATCH AND PRECISE
TAILORING IMPOSSIBLE. LIMIT APPLICATION TO PIECES WITH SIMPLE UPHOLSTERY.
#15
NOTE THAT THE MOTIF APPEARS ONLY DOWN THE SIDE OF THIS FABRIC. CENTERING THIS
MOTIF ON CUSHIONS, SKIRTS, ETC. REQUIRE SEAMS TO APPEAR BECAUSE THE FABRIC IS
TOO NARROW FOR SOME APPLICATIONS. I.E. T-SEAT CUSHIONS.
#16
FABRIC SUITABLE FOR OUTDOORS. (SEE NEXT PAGE FOR WEARABILITY DETAILS)
|
